UKERC Energy Data Centre: Projects

Projects: Custom Search
UKERC Home >> UKERC Energy Data Centre >> Projects >> Custom Search >> List of Projects Found >> EP/V057626/1
 
Reference Number EP/V057626/1
Title FINER: Future thermal Imaging with Nanometre Enhanced Resolution
Status Started
Energy Categories ENERGY EFFICIENCY (Industry) 10%;
NOT ENERGY RELATED 90%;
Research Types Basic and strategic applied research 100%
Science and Technology Fields PHYSICAL SCIENCES AND MATHEMATICS (Physics) 80%;
ENGINEERING AND TECHNOLOGY (Electrical and Electronic Engineering) 20%;
UKERC Cross Cutting Characterisation Not Cross-cutting 100%
Principal Investigator Professor M Kuball
No email address given
Physics
University of Bristol
Award Type Standard
Funding Source EPSRC
Start Date 01 February 2022
End Date 31 July 2025
Duration 42 months
Total Grant Value £691,078
Industrial Sectors Electronics
Region South West
Programme NC : Physical Sciences
 
Investigators Principal Investigator Professor M Kuball , Physics, University of Bristol (100.000%)
  Industrial Collaborator Project Contact , Massachusetts Institute of Technology (MIT), USA (0.000%)
Project Contact , Technische Universität Braunschweig, Germany (0.000%)
Project Contact , Thales Group, France (0.000%)
Project Contact , Nagoya University, Japan (0.000%)
Project Contact , IconicRF Ltd (0.000%)
Project Contact , United Monolithic Semiconductors (UMS), France (0.000%)
Project Contact , Northrop Grumman Aerospace Systems (0.000%)
Web Site
Objectives
Abstract The ever-increasing combined carbon footprint of information and communications technology (ICT) is unsustainable - more efficient devices must be developed. Thermal characterisation, which feeds into design optimisation, is one of the key steps for ensuring the efficiency and reliable operation of the new electronic devices being developed. However, accurately measuring the temperature of leading-edge electronic devices is becoming increasingly difficult or impossible because of their small size, and that is the challenge addressed in this proposal. Wide bandgap electronic devices including GaN have great proven potential for the next generation of sustainable ICT and power electronics, contributing to the needed carbon emissions reduction. Miniaturization is one of the routes to further increase the efficiency and performance of wide bandgap electronic devices, decreasing the active region size to <200 nm, similar to the technology pathway that silicon (Si) electronics has taken, using concepts such as the FinFET. Thermal management, which is the efficient extraction of waste heat from the active part of the device, is especially important for achieving efficient reliable nanoscale electronic devices; thermal resistance increases as they are "scaled" to nanometre dimensions because of a thermal conductivity reduction and heat confinement in 3-D device structures, e.g. in a fin shape. While self-heating can be mitigated reasonably easily for lower power density Si FinFETs, it is potentially a significant roadblock for "scaled" wide bandgap devices which operate at enormous power densities. However there is currently no thermal imaging technique with a sufficiently high spatial resolution (e.g. Raman thermography has a diffraction limited resolution of about 0.5 micrometer, >10x the hotspot size) to be able to accurately measure the hotspot temperature of these novel nanoscale wide bandgap electronic devices. Instead we currently rely on complex electrothermal models to estimate the temperature of nanoscale devices, with inherent uncertainties - measurement is needed.A step change is required, namely a sub diffraction limit (super resolution) thermal imaging technique, which is addressed by the Future thermal Imaging with Nanometre Enhanced Resolution (FINER) project. We will develop a transformative nano quantum dot based thermal imaging (nQTI) technique to deliver nanometre resolution thermal imaging for the first time. To demonstrate the newly developed technique our application focus is on scaled wide bandgap electronic devices supplied by our national and international partners, however this technique will be widely applicable. Quantum dots are ideal for this application: They can be deposited as a nm-thickness film on the surface of the device being tested, and the emission colour is temperature dependent, which is what we exploit for thermal imaging. Structured Illumination Microscopy (SIM) and Stimulated EmissionDepletion (STED) super-resolution techniques which were originally developed for fluorescence microscopy, but are presently unsuitable for thermal imaging, will be exploited to achieve a resolution as small as 50nm for nQTI. nQTI will enable nano-scale electrothermal models to be developed and experimentally verified. Accurate models will further our understanding of nano-scale self-heating and heat diffusion, feeding back into improved device designs and novel thermal management solutions. This work will be done at the Centre for Device Thermography and Reliability (CDTR) which has an international reputation for being at the forefront of high spatial and temporal resolution thermal imaging, pioneering Raman thermography. This expertise makes the CDTR ideally placed to deliver this project successfully. The generous industrial support for this programme demonstrates that there is a great need for this and their belief in our ability to successfully deliver it
Publications (none)
Final Report (none)
Added to Database 27/04/22