go to top scroll for more

Projects: Projects for Investigator
Reference Number	EP/P021573/1
Title	2-D Forming of Low Cost Steered Fibre Laminates
Status	Completed
Energy Categories	Renewable Energy Sources(Wind Energy) 40%; Energy Efficiency(Transport) 20%; Not Energy Related 40%;
Research Types	Basic and strategic applied research 100%
Science and Technology Fields	PHYSICAL SCIENCES AND MATHEMATICS (Metallurgy and Materials) 50%; ENGINEERING AND TECHNOLOGY (Mechanical, Aeronautical and Manufacturing Engineering) 50%;
UKERC Cross Cutting Characterisation	Not Cross-cutting 100%
Principal Investigator	Dr P Harrison No email address given Aerospace Engineering University of Glasgow
Award Type	Standard
Funding Source	EPSRC
Start Date	01 October 2017
End Date	30 March 2021
Duration	42 months
Total Grant Value	£383,551
Industrial Sectors	Manufacturing
Region	Scotland
Programme	Manufacturing : Manufacturing
Investigators	Principal Investigator	Dr P Harrison , Aerospace Engineering, University of Glasgow (100.000%)
	Industrial Collaborator	Project Contact , University of Nottingham (0.000%) Project Contact , National Composites Centre (0.000%) Project Contact , Dassault Systemes Simulia Ltd (0.000%) Project Contact , ESI Group, France (0.000%) Project Contact , National Institute of Statistics and Geography (INEGI), Mexico (0.000%)
Web Site
Objectives
Abstract	By 2020, the advanced composite market is predicted to be worth around 17 billion, with automotive the second largest growth sector (after wind energy) but still falling far short of its enormous growth potential; the high cost of production for advanced composite products is still a major obstacle to their wider exploitation. Government legislation on the reduction of emissions is an important driver across the transport sector and one way to achieve prescribed targets is through the substitution of relatively heavy metallic components with highly optimised light-weight advanced polymer composite parts. Consequently, there is an urgent need to address the economic viability of manufacturing with advanced polymer composites and realise their full weight and fuel saving potential. The proposed project aims to contribute to this overarching goal by introducing an ambitious low-cost route to manufacturing highly optimised advanced composite structures. The ability to produce 'steered-fibre laminates' containing non-linear fibre paths, creates a step change in the design space for advanced composite structures. The designer is able to reposition stress concentrations away from holes and inserts, improve a laminate's resistance to buckling and failure, and to enhance a laminate's dynamic response to vibrations. Ultimately this can lead to lighter, more optimised structures for use in the aerospace and automotive sectors, enhancing fuel efficiency and contributing to the broader goals of reduced cost and lower emissions across the transport sector. The aim of the proposed project is to implement and demonstrate a novel and disruptive manufacture process that can produce low-cost high-quality steered-fibre laminates, without use of expensive, capital intensive automated fibre placement machines (the current solution). The new process is best described as 2-D forming; in order to support this novel manufacture process, a custom-designed suite of computer aided design an manufacture software will be developed. Computational tools for digital manufacturing are essential if 2-D forming is to be successfully achieved without inducing severe wrinkling and buckling of the deforming biaxial sheet. Reducing cost will effectively bring fibre-steering technology to a broader range of applications, increasing its economic impact and bringing new manufacturing capabilities to a wider industrial base, with the UK leading the way in this important area of manufacturing
Publications	(none)
Final Report	(none)
Added to Database	02/01/18