Development of Innovative Metal Supported IT-SOFC Technology

Completed

Hydrogen and Fuel Cells(Fuel Cells)

Applied Research and Development

PHYSICAL SCIENCES AND MATHEMATICS (Metallurgy and Materials)

Not Cross-cutting

Mr R Leah
Ceres Power Limited

Standard

DTI

01 August 2003

30 November 2004

15 months

£299,191

Power

South East

FCELLS

Mr R Leah, Ceres Power Limited

The aim of this project was to develop and demonstrate cells and stacks based on the innovative metal supported Solid Oxide Fuel Cell technology developed by Ceres Power, and to perform detailed design studies on options for micro-CHP systems at the 5 kWe scale. The roject had the following targets: Cell power density to be increased, from 80mWcm- at 600 C at the project start, to 200mW cm- at 550 C by the project end. Single cellto be demonstrated for 1,000 hours with less than 3 degradation. Single cell to be demonstrated with less than 5 performance degradation after 5 thermal cycles. Short stack to be demonstrated for 1,000 hours with less than 5 performance degradation. Short stack to be demonstrated with less than 10 performance degradation after 5 thermal cycles. 100We short stack to be demonstrated operating at 550 C. 5kWe natural-gas fired micro- CHP system to be simulated capable of delivering more than 35 electrical efficiency. 5kWe stack conceptto be developed, with the potential for volume production at a cost of less than $400/kWe. Project value 598382. DTI grant = 299191.

01/01/07