UKERC Energy Data Centre: Projects

Projects: Projects for Investigator
UKERC Home >> UKERC Energy Data Centre >> Projects >> Choose Investigator >> All Projects involving >> EP/L025981/1
 
Reference Number EP/L025981/1
Title High Fidelity Ion Beam Simulation of High Dose Neutron Irradiation
Status Completed
Energy Categories NUCLEAR FISSION and FUSION(Nuclear Fission, Other nuclear fission) 80%;
NUCLEAR FISSION and FUSION(Nuclear Fusion) 20%;
Research Types Basic and strategic applied research 100%
Science and Technology Fields PHYSICAL SCIENCES AND MATHEMATICS (Chemistry) 20%;
PHYSICAL SCIENCES AND MATHEMATICS (Metallurgy and Materials) 80%;
UKERC Cross Cutting Characterisation Not Cross-cutting 100%
Principal Investigator Dr M Preuss
No email address given
Materials
University of Manchester
Award Type Standard
Funding Source EPSRC
Start Date 26 June 2014
End Date 25 December 2017
Duration 42 months
Total Grant Value £507,738
Industrial Sectors Energy
Region North West
Programme Energy : Energy
 
Investigators Principal Investigator Dr M Preuss , Materials, University of Manchester (99.997%)
  Other Investigator Professor SM Pimblott , Chemistry, University of Manchester (0.001%)
Professor M A (Michael ) Burke , Materials, University of Manchester (0.001%)
Dr C P Race , Materials, University of Manchester (0.001%)
Web Site
Objectives
Abstract The promise for developing new, advanced nuclear reactor concepts and the extension of life of existing light water nuclear reactors rests heavily on understanding how radiation degrades materials that serve as the structural components in reactor cores. In high dose fission reactor concepts (GEN-4) structural materials must survive up to 200 dpa of damage at temperatures in excess of 400C. At such high damage levels, the major degradation modes are likely to be driven by void swelling and phase stability. As materials degradation due to irradiation is both a life-limiting and a concept-validating phenomenon, it is truly the grand challenge for the growth and vitality of nuclear energy world-wide.Traditionally, research to understand radiation-induced changes in materials is conducted via radiation effects experiments in test reactors, followed by a comprehensive post-irradiation characterization plan. However, test reactors cannot create radiation damage significantly faster than that in commercial reactors, meaning that radiation damage research often cannot "get ahead" of problems discovered during operation.A promising solution to the problem is to use ion irradiation that can produce high damage rates with little or no residual radioactivity. The advantages of ion irradiation are many. Dose rates (typically 10-3 to 10-4 dpa/s) are much higher than under neutron irradiation (10-7 to 10-8 dpa/s) which means that 200 dpa can be reached in days or weeks instead of decades. Because there is little activation the samples are not radioactive. Control of ion irradiation experiments is much better than experiments in reactor. Measurement of temperature, damage rate and damage level is difficult in reactor, resulting in reliance on calculations to determine the total dose, and estimate irradiation temperature. By contrast, ion irradiations have been developed to the point where temperature is extremely well controlled and monitored, and damage rate and total damage are also measured continuously throughout the irradiation and with great accuracy.However, ion irradiation has several potential drawbacks; the volume of irradiated material, the effect of high damage rate on the resulting microstructure, and the need to account for important transmutation reactions that occur in reactor, such as the production of He and H. Understanding and modeling the microstructure-property relationship, and the development of micro-sample fabrication and testing, while not a replacement for bulk property determination, hold the promise for minimizing the drawback of limited irradiated volume. The extent to which high damage rates can produce microstructures relevant to reactor conditions is a major challenge, but significant progress is being made to address this issue.The strategy to account for transmutation reactions is to simultaneously irradiate a target with heavy ions while also bombarding it with He and/or H. Such a process requires multiple accelerators coupled in a double or triple beam facility. Recently, the UK has begun development of a plan to create such a double beam facility at its Dalton Cumbrian Facility and the proposed project will underpin this activity.To qualify ion irradiation it is necessary to reproduce as best as possible both the neutron irradiated microstructure and the neutron-induced macroscopic property changes using ion irradiation. This task is best addressed using a combination of state of the art experimental techniques closely coupled to modeling, which can yield mechanistic understanding of the defect development process, while taking into account in the experimental design and theoretical modeling the possible confounding factors mentioned above.
Publications (none)
Final Report (none)
Added to Database 30/10/14