go to top scroll for more

Projects


Projects: Projects for Investigator
Reference Number EP/F029748/1
Title SUPERGEN 2 - Conventional Power Plant Lifetime Extension Consortium - CORE
Status Completed
Energy Categories Other Power and Storage Technologies(Electric power conversion) 50%;
Fossil Fuels: Oil Gas and Coal(Coal, Coal combustion) 25%;
Renewable Energy Sources(Bio-Energy, Applications for heat and electricity) 5%;
Fossil Fuels: Oil Gas and Coal(Oil and Gas, Oil and gas combustion) 20%;
Research Types Basic and strategic applied research 100%
Science and Technology Fields PHYSICAL SCIENCES AND MATHEMATICS (Metallurgy and Materials) 30%;
ENGINEERING AND TECHNOLOGY (Electrical and Electronic Engineering) 15%;
ENGINEERING AND TECHNOLOGY (General Engineering and Mineral & Mining Engineering) 15%;
ENGINEERING AND TECHNOLOGY (Mechanical, Aeronautical and Manufacturing Engineering) 40%;
UKERC Cross Cutting Characterisation Not Cross-cutting 100%
Principal Investigator Professor RC Thomson
No email address given
Inst of Polymer Tech and Materials Eng
Loughborough University
Award Type Standard
Funding Source EPSRC
Start Date 01 July 2008
End Date 30 December 2012
Duration 54 months
Total Grant Value £4,191,998
Industrial Sectors Energy
Region East Midlands
Programme Energy Multidisciplinary Applications, Energy Research Capacity
 
Investigators Principal Investigator Professor RC Thomson , Inst of Polymer Tech and Materials Eng, Loughborough University (99.982%)
  Other Investigator Dr RL Higginson , Inst of Polymer Tech and Materials Eng, Loughborough University (0.001%)
Professor JR Nicholls , School of Applied Sciences, Cranfield University (0.001%)
Mr JE (John ) Oakey , School of Applied Sciences, Cranfield University (0.001%)
Dr NJ (Nigel ) Simms , School of Applied Sciences, Cranfield University (0.001%)
Dr KR Hallam , Interface Analysis Centre, University of Bristol (0.001%)
Professor P Flewitt , Interface Analysis Centre, University of Bristol (0.001%)
Dr MJ Pavier , Mechanical Engineering, University of Bristol (0.001%)
Dr P Wilcox , Mechanical Engineering, University of Bristol (0.001%)
Dr CE Truman , Mechanical Engineering, University of Bristol (0.001%)
Dr B Drinkwater , Mechanical Engineering, University of Bristol (0.001%)
Professor D Smith , Mechanical Engineering, University of Bristol (0.001%)
Professor PH Shipway , Mechanical, Materials and Manufacturing Engineering, University of Nottingham (0.001%)
Dr W Sun , Mechanical, Materials and Manufacturing Engineering, University of Nottingham (0.001%)
Professor DG McCartney , Mechanical, Materials and Manufacturing Engineering, University of Nottingham (0.001%)
Professor A Becker , Mechanical, Materials and Manufacturing Engineering, University of Nottingham (0.001%)
Professor T Hyde , Mechanical, Materials and Manufacturing Engineering, University of Nottingham (0.001%)
Dr IA Jones , Mechanical, Materials and Manufacturing Engineering, University of Nottingham (0.001%)
Dr S (Sean ) Leen , Mechanical & Biomedical Engineering, National University of Ireland, Galway (NUI Galway) (0.001%)
  Industrial Collaborator Project Contact , QinetiQ Ltd (0.000%)
Project Contact , RWE npower plc (0.000%)
Project Contact , Sermatech International (0.000%)
Project Contact , Corus (0.000%)
Project Contact , E.ON UK (formerly PowerGen) (0.000%)
Project Contact , Babcock International Group plc (0.000%)
Project Contact , National Physical Laboratory (NPL) (0.000%)
Project Contact , Siemens Industrial Turbomachinery (0.000%)
Project Contact , Alstom Power Ltd (0.000%)
Project Contact , Rolls-Royce PLC (0.000%)
Web Site https://gtr.ukri.org/projects?ref=EP%2FF029748%2F1
Objectives
Abstract The focus of the current Supergen Plant Lifetime Extension consortium project is the development of novel tools and methodologies to extend the life of existing conventional (ageing) steam and combined cycle power plant which utilise well established materials systems that have been in service for many years. The R&D is focussed on the areas of: condition monitoring/NDT, environmental degradationand protection, microstructural degradation, mechanical modelling and the development of lifetimeprediction tools. In terms of the failure modes, it focuses primarily on creep and corrosion.The current work provides a detailed understanding about the 'older' conventional materials and the ageing plant they operate in. In terms of moving forward, the indications from the 2007 Energy White Paper are that there will be less emphasis on life extension and more emphasis on 'new-build', high efficiency plant, possibly including CO2 capture technologies (but certainly allowing for their later addition). The plant technologies being considered in the UK are: high temperature USC steam plant, co-firing, pre/post combustion CO2 capture plant, e.g. gasification, oxy-firing, amine scrubbing, etc. Inaddition, general fuel flexibility will also remain a key issue.One of the main drivers for the next generation of power plant is not only reduced environmental impact but also security of electricity supply, i.e. reliability. Significant R&D into the technologies and methodologies for the lifing of the next generation power plant is needed now, to ensure reliability targets are met. This meansacomprehensive understanding of the behaviour of the materials being used and their in-service degradation is needed.The new proposal 'Plant Lifing of High Efficiency, Low CO2 Emission Power Plant.' is moving the R&D to the 'next level', and is seen as a natural progression to the current project, as its primary focus will be on the above 'novel'advanced plant. In this way, it will take the methods already developed in the current programme and further enhance them and more importantly develop new tools and methods for the new materials and environments that will be present in the advanced power plant of the future. This shows a natural transition and progression for the PLE project and its consortium.The proposal, which has been developed after extensive consultation with stakeholders,isbased around three integrated and coordinated technology themes and a dissemination theme. These include; advanced steam systems, advanced gas turbines, advanced cycles (including biomass co-firing, oxy-firing). Within each theme there are a number of Tasks that together constitute the whole programme of work. A key feature of the programmeof work is the essential and close interaction between the Themes and the individual Tasks that define the proposed programme in more detail. The interactions take a wide range of forms, from providing materials for testing to the development of collaborative integrated models for validation of the component life extension toolbox to be developed. The dissemination will involve national and international collaboration and events.In addition a number of key proposals have been submitted under the 'plus' part of the Supergen programme which will provide additionality to the overall project.The project has the full support of a large industrial consortium representing the full UK Power Generation supply chain
Publications (none)
Final Report (none)
Added to Database 05/12/07