go to top scroll for more

Projects: Projects for Investigator
Reference Number	EP/I028781/1
Title	Microstructural evolution of CdTe-based solar cells during chlorine activation
Status	Completed
Energy Categories	Renewable Energy Sources(Solar Energy, Photovoltaics) 100%;
Research Types	Basic and strategic applied research 100%
Science and Technology Fields	PHYSICAL SCIENCES AND MATHEMATICS (Physics) 100%
UKERC Cross Cutting Characterisation	Not Cross-cutting 100%
Principal Investigator	Dr B Mendis No email address given Physics Durham University
Award Type	Standard
Funding Source	EPSRC
Start Date	09 January 2012
End Date	08 January 2014
Duration	24 months
Total Grant Value	£102,124
Industrial Sectors	Energy
Region	North East
Programme	Physical Sciences, Process Environment and Sustainability
Investigators	Principal Investigator	Dr B Mendis , Physics, Durham University (100.000%)
Web Site
Objectives
Abstract	The solar cell market is currently dominated (>80%) by first generation, wafer silicon-based solar cells. Silicon is a poor absorber of light and consequently relatively large volumes of material are required. A direct band gap semiconductor, such as CdTe, has a much higher efficiency for light absorption, so that thin film solar cells can be fabricated. However, in order for CdTe-based solar cells to challenge wafer silicon, its overall device efficiency must be improved. CdTe solar cells always undergo a chlorine 'activation' treatment, where a thin layer of CdCl2 is deposited on the CdTe surface and annealed at a temperature of 400OC for 20-30 mins. This process increases the device efficiency from ~1-3% to ~10-14%. Despite the 10-fold increase in efficiency the activation process remains poorly understood, due to the difficulty in characterising the microstructure at the appropriate length scales (the dominant mechanism is thought to be passivation of grain boundaries due to chlorine segregation).In this project microstructural changes taking place during chlorine activation are characterised using electron microscopy techniques. The PI has developed a novel, cathodoluminescence based method for determining the recombination velocity of an individual grain boundary in a real device structure. Hence it is now possible to examine the role of grain boundaries on solar cell efficiency for the first time. There have also been important advances in instrumentation over the last few years. In particular, monochromated electron microscopes enable local optical property (e.g. band gap, absorption coefficient) measurement at spatial resolutions of only a few nanometres. During chlorine activation, sulphur inter-diffusion takes place at the p-n junction (i.e. the CdS-CdTe interface), which affects carrier generation during illumination. The monochromated electron microscope at Imperial College London will be used to characterise the effects of sulphur inter-diffusion on optical properties of the p-n junction, and understand how this affects device efficiency.CdCl2 has a low evaporation temperature and is water soluble, making it hazardous to handle on a large scale (e.g. in industrial-scale manufacture). Hence alternative, safer methods for activation, such as the use of chlorine containing gases, will also be explored. The microstructure of solar cells activated using chlorine containing gases will be compared to CdCl2 activated solar cells, and correlated with the measured increase in efficiency. Experimental results will be incorporated into a computer programme for modelling solar cell operation. The purpose of the programme is to identify the dominant mechanism(s) underpinning chlorine activation as well as rapid screening of potential processing routes designed to optimise solar cell efficiency. The latter is a paradigm shift in solar cell fabrication methodology, moving away from methods based on trial and error, which are time consuming and costly
Publications	(none)
Final Report	(none)
Added to Database	16/02/12