In-depth Studies of OxyCoal Combustion Processes through Numerical Modelling and 3D Flame Imaging

Completed

Fossil Fuels: Oil Gas and Coal(Coal, Coal combustion)
Fossil Fuels: Oil Gas and Coal(CO2 Capture and Storage, CO2 capture/separation)

Basic and strategic applied research

ENGINEERING AND TECHNOLOGY (Mechanical, Aeronautical and Manufacturing Engineering)

Not Cross-cutting

Dr J Gibbins
Sch of Engineering and Electronics
University of Edinburgh

Standard

EPSRC

01 November 2009

31 May 2013

43 months

£209,094

Mechanical engineering

Scotland

Energy : Energy

Dr J Gibbins, Sch of Engineering and Electronics, University of Edinburgh

Dr AM Kempf, University of Duisberg-Essen, Germany

Project Contact, BOC Ltd
Project Contact, Babcock International Group plc
Project Contact, Electric Power Research Institute (EPRI), USA
Project Contact, Fluent Europe Ltd
Project Contact, Research Partner in China
Project Contact, RWE Generation
Project Contact, South China University of Technology, China
Project Contact, Zhejiang University, China

Linked to grants EP/G063451/1 and EP/G063214/1

Coal will likely remain in an important position in the world energy mix in the foreseeable future because of its stability in supply and low cost in production. However, coal fired power generation industry has to substantially reduce its pollutant emission to survive in the future carbon constrained energy market. Oxycoal combustion with CO2 capture from flue gas is an emerging technology thatcan be adapted to both new and existing coal-fired power stations leading to a substantial reduction in carbon emission. Various assessments suggest that oxycoal technology is feasible and more favourable than other CCS (Carbon Capture and Storage) technologies, such as post-carbon capture.Currently, oxycoal combustion technology is still in its laboratory and technology demonstration stages andthere is a significant knowledge gap in this new technology. A number of uncertainties exist in the combustion process where the changes in the heat transfer and combustion characteristics are, among others, the major concerns. Issues with system designs such as the optimum oxygen concentrations and its impact need to be investigated. Other complications include such as high concentrations of sulphur and mercury and changes in deposition and corrosion in the boiler and the downstream elements. If the technology is to be widely adopted in power generation industry for CCS then it is imperative that the impacts of these changes in the combustion processes are well understood, and that economic solutions to mitigating the problems encountered are identified.The proposed research aims to achieve an in-depth understanding of the oxycoal combustion processes, to develop key modelling capabilities for process prediction, and to provide guidelines to the power generation industry on design new and/or retrofitting existing power plant with oxycoal combustion technology. Because of the high costs of performing large scale tests, process modelling is commonly used as an alternative in technology development. In this project, advanced Computational Fluid Dynamics (CFD) techniques will be employed to perform detailed simulations on the oxycoal combustion processes. Because the oxycoal combustion is very different from the conventional air-coal combustion, new oxycoal specific CFD sub-programmes will be developed in order to achieve accurate modelling results. In parallel to the CFDmodelling, well controlled practical measurements will be carried out to setup a comprehensive database on the oxycoal combustion and to provide validation to the CFD model development. In addition, a unique 3D flame monitoring system will be developed to monitor the oxycoal combustion flames. This integrated approach of advanced computational modelling, detailed experimental testing, and 3D flame imaging forms a mutual validating and complementary system to ensure a credible research output so that an in-depth understanding of the impact of oxycoal on flame characteristics, critical reaction kinetics, and devolatilsation and char reaction in the combustion processes may be achieved.The project consortium comprises of three academic centres of expertise from Leeds, Kent and the ImperialCollege. Three leading energy research institutes in China are joint force on the research. Collaborative research programmes have been arranged to carryout experimental testing and theoretical simulation in both UK and China. The project has also gained strong supported from leading power generation companies and commercial CFD developer providing practical advice on oxycoal combustion tests andcombustion model development. The project provides a platform for the leading UK groups and leading Chinese partners to work together in tackling the significant issues related to the oxycoal combustion technology, which is expected to contribute significantly in cutting the CO2 and other greenhouse gases emissions in the power industry in both countries

20/04/09