UKERC Energy Data Centre: Projects

Projects: Projects for Investigator
UKERC Home >> UKERC Energy Data Centre >> Projects >> Choose Investigator >> All Projects involving >> EP/M001482/1
 
Reference Number EP/M001482/1
Title Selective Exhaust Gas Recirculation for Carbon Capture with Gas Turbines: Integration, Intensification, Scale-up and Optimisation.
Status Completed
Energy Categories FOSSIL FUELS: OIL, GAS and COAL(CO2 Capture and Storage, CO2 capture/separation) 100%;
Research Types Basic and strategic applied research 100%
Science and Technology Fields ENGINEERING AND TECHNOLOGY (Mechanical, Aeronautical and Manufacturing Engineering) 100%
UKERC Cross Cutting Characterisation Not Cross-cutting 100%
Principal Investigator Dr R Marsh
No email address given
Engineering
Cardiff University
Award Type Standard
Funding Source EPSRC
Start Date 01 December 2014
End Date 31 May 2018
Duration 42 months
Total Grant Value £1,099,891
Industrial Sectors Energy
Region Wales
Programme Energy : Energy
 
Investigators Principal Investigator Dr R Marsh , Engineering, Cardiff University (99.989%)
  Other Investigator Professor M Pourkashanian , Energy Resources Research Unit, University of Leeds (0.001%)
Professor H McCann , Electrical & Electronic Engineering, University of Manchester (0.001%)
Dr J (John ) Gibbins , Sch of Engineering and Electronics, University of Edinburgh (0.001%)
Dr MS Lucquiaud , Sch of Engineering and Electronics, University of Edinburgh (0.001%)
Dr P Valluri , Sch of Engineering and Electronics, University of Edinburgh (0.001%)
Dr J Jia , Sch of Engineering and Electronics, University of Edinburgh (0.001%)
Dr D Shin , Sch of Engineering and Electronics, University of Edinburgh (0.001%)
Professor P Bowen , Engineering, Cardiff University (0.001%)
Dr A Valera-Medina , Engineering, Cardiff University (0.001%)
Dr L Ma , Computational Fluid Dynamics, University of Leeds (0.001%)
Dr KJ Hughes , Computational Fluid Dynamics, University of Leeds (0.001%)
  Industrial Collaborator Project Contact , Industrial Tomography Systems plc (0.000%)
Project Contact , Sulzer Chemtech Ltd, Switzerland (0.000%)
Project Contact , Costain Ltd (0.000%)
Project Contact , Howden Group Technology (0.000%)
Project Contact , SSE Energy Supply Limited UK (0.000%)
Web Site
Objectives
Abstract UK electricity generation still relies around 80% on fossil fuels, with a resulting carbon intensity - the amount of carbon emitted to the atmosphere per unit of electricity generated - ten times higher than the level recommended to avoid dangerous climate change. Half of that electricity currently comes for natural gas and is expected to increase in the next decade as new gas-fired generation is commissioned to replace, along with renewables, old inefficient coal plants built in the 1960s. Over 20GW of gas capacity has been permitted since 2007, equivalent to a quarter of the current installed capacity for electricity generation.Unabated (no carbon capture) gas plants produce six to seven the amount of carbon per unit of electricity compared to the levels recommended for UK electricity generation by 2030. They must be fitted with Carbon Capture and Storage to provide reliable low-carbon energy to fill-in gaps between inflexible nuclear and intermittent wind power generation and a fluctuating electricity demand.Gas CCS R&D is an important emerging field, particularly to address the issue of rapidly increasing additional carbon in shale gas reserves, and many of the concepts and underlying scientific principles are still being 'invented'. Ongoing UK infrastructure investments and energy policy decisions are being made which would benefit from better information on relevant gas CCS technologies, making independent, fundamental studies by academic researchers a high priority.The UK is leading Gas CCS deployment with the retrofit of Peterhead power station, as part of the UK CCS Commercialisation programme at the time of writing. Key engineering challenges remain for the second and third tranche of gas CCS projects to be rolled out in the 2020s and 2030s. Efficient and cost-effective integration of CCS with gas turbines would be enhanced and costs of electricity generation greatly reduced if the carbon dioxide (CO2) concentration in the exhaust were much higher than the typical 3-4% value seen in modern Gas Turbine systems.An innovative solution is to selectively recirculate CO2, upstream of the post-combustion CO2 capture process, from the Gas Turbine exhaust back through the inlet of the engine, thereby greatly increasing CO2 concentration and subsequently reducing the burden on the CCS plant.The main result would be a more cost-effective plant with a significantly reduced visual impact. In order to achieve this concept, 3 main challenges must be overcome, which form the basis of the proposed work:1. Plant Design and Optimisation. Based on advice from manufacturers and research data, a series of scenarios will be considered for the amount of exhaust recirculation through the engine. This will include results from other parts of the project, such as the engine performance tests.2. GT-CCS Integration. Experimental testing will show how engines and CCS processes function when the two must work in a symbiotic fashion. This willinclude the measurement of gas turbine burner performance under operational conditions, engine testing, plus experiments on CCS columns to determine their effectiveness with this recirculated exhaust gas.3. Scale-up and Intensification. Based on the research data gathered in the previous steps, the project will then publish findings on the viability of this concept, including application of this data to set design rules for future GT-CCS plants. Applying this idea further the project will estimate the impact on the UK's energy mix if these plants were considered economically viable.This project has a strong practical basis, employing a variety of state-of-the-art research facilities from 3 well-established UK Universities. These will include measurement of combustion behaviour under high pressure and temperature conditions, performance testing of GT engine sets with recycled exhaust and fundamental studies of the behaviour of CCS columns.
Publications (none)
Final Report (none)
Added to Database 05/01/15