Development of fast pyrolysis based advanced biofuel technologies for biofuels

Completed

Renewable Energy Sources(Bio-Energy, Production of transport biofuels (incl. Production from wastes))

Basic and strategic applied research

ENGINEERING AND TECHNOLOGY (Chemical Engineering)

Not Cross-cutting

Dr S Gu
School of Engineering
Cranfield University

Standard

EPSRC

12 September 2015

11 July 2018

34 months

£756,467

Energy

East of England

Energy : Energy

Dr S Gu, School of Engineering, Cranfield University

Professor AV Bridgwater, Sch of Engineering and Applied Science, Aston University
Dr K Wilson, Chemistry, Cardiff University

Project Contact, Centre for Process Innovation - CPI
Project Contact, Madrid Institute of Advanced Studies (IMDEA), Spain
Project Contact, BTG Biomass Technology Group BV, The Netherlands

The use of biofuels, as a renewable source of energy has become increasingly important. More in particular, biofuels for transport have the potential to displace a substantial amount of petroleum around the world. The EU is aiming to achieve at least 10% of road fuel derived from plants by 2020. The Carbon Trust selected "Pyrolysis Challenge" as the first strand of Bioenergy Accelerator with 10m investment, highlighting the importance of pyrolysis-oil as the potential replacement for transport fuels with low system GHG (green house gases) emissions. While fast pyrolysis oils have the potential to be processed in existing petroleum refinery infrastructure to transportation fuels, our ability to process the oil requires improved understanding of how to control its chemical composition and improve its physical properties. Current fast-pyrolysis oils are inherently unstable due to their high oxygen content and acidity which leads to polymerisation of reactive components and subsequent viscosity increase via polymer formation which hinders direct refining. Catalytic processes are thus required capable of transforming fast pyrolysis oils such that their acidity and oxygen content is reduced under moderate conditions thereby improving oil stability and allowing direct refining. To minimise energy inputs, it would be desirable to catalytically treat pyrolysis oil vapours immediately after the pyrolyser using a close coupled catalytic reactor to facilitate deoxygenation, chain growth and/or aromatisation of molecules. Such an approach would minimise extra energy inputs but also reduce polymerisation routes into more intractable resins. To achieve these goals we propose to explore non-precious metal de-oxygenation cracking catalysts including doped zeolite materials and bifunctional Fe based catalysts for pre-treatment of pyrolysis oil vapours. By working in the vapour phase we should eliminate some of the problems currently associated with the use of such catalysts in liqud phase processes where leaching by acidic components and char deposition leads to deactivation. The impact of pre-treatment on overall final hydrodeoxygenation (HDO) of bio-oil will also be evaluated. These routes to refinery feedstocks will be compared technically and economically

25/04/16