Performance and Reliability of Metallic Materials for Nuclear Fission Power Generation

Completed

Nuclear Fission and Fusion(Nuclear Fission, Nuclear supporting technologies)

Basic and strategic applied research

ENGINEERING AND TECHNOLOGY (Mechanical, Aeronautical and Manufacturing Engineering)

Not Cross-cutting

Professor D Smith
Mechanical Engineering
University of Bristol

Standard

EPSRC

04 October 2010

03 October 2014

48 months

£228,690

Energy

South West

Energy : Energy

Professor D Smith, Mechanical Engineering, University of Bristol

Dr AJ Croxford, Mechanical Engineering, University of Bristol
Dr TB Scott, Interface Analysis Centre, University of Bristol

The following grants are linked together: EP/I003088/1, EP/I003150/1, EP/I003290/1, EP/I003274/1, EP/I003282/1 and EP/I003207/1

In this research programme we will address fundamental research challenges for the long-term performance and stability of materials for nuclear fission power plant. The lifetime of power plant components is limited because of limits in their endurance under exposure to high temperatures, high loads, radiation, and the effects of cycling of load and temperature; there are issues related to corrosion that are exacerbated by applied stresses and residual stresses in materials; and the high neutron radiation flux in the core of the reactor generates progressive damage that must be understood if we are to be able to design new materials for future reactor systems with improved lifetimes and efficient use of nuclear fuel. This research programme will underpin the development of the nuclear fission power generation systems of the future.Metallic systems used in nuclear reactors range from pressure vessel steels to fuel cladding tubes to stainless steels used in the heat exchangers. The particular operating conditions for each component are unique and require carefully tailored materials properties. There are significant challenges in enhancing materials performance for operations at higher temperatures for longer lifetimes, and we have to improve our understanding of the fundamental mechanisms by which materials degrade and by which damage develops in nuclear reactors and their associated high-temperature plant.We will address fundamental research problems in improving the long-term performance of materials for nuclear plant exposed to service conditions of high temperatures,high neutron radiation fluences and complex load histories. The critical research challenges that arise for materials performance under these conditions are "Materials Stability and Degradation" and "State Monitoring of Materials". We propose to address them through a broad collaborative programme incorporating the leading UK university groups and our wide network of external partners.The research programme is targeted mainly at the theme of "Long term materials behaviour", but with a significant contribution in the area of "fuel cladding materials". We have integrated work in these two areas because there is significant commonality in the research methodology (experimental and modelling) required for the study of the different metallic systems and becauseof our experience of the significant benefits that flow from maintaining close relationships with other nuclear research programmes in partner institutions.From our previous track record, we confidently expect a high degree of gearing as the work of the new consortium will complement and bring together our existing individual programmes, funded by industry and the Research Councils. In addition to delivering new research outputs and a cohort of trained researchers, this will place us in a strong position to respond effectively and in a coordinated manner to future funding opportunities from industry, the EU and the wider international nuclear community

01/11/10