go to top scroll for more


Projects: Projects for Investigator
Reference Number EP/L018365/1
Title Hybrid Nanoporous Adsorption / High-pressure Gas Hydrogen Storage Tanks
Status Completed
Energy Categories Hydrogen and Fuel Cells(Hydrogen, Hydrogen storage) 100%;
Research Types Basic and strategic applied research 100%
Science and Technology Fields PHYSICAL SCIENCES AND MATHEMATICS (Chemistry) 25%;
ENGINEERING AND TECHNOLOGY (Chemical Engineering) 25%;
ENGINEERING AND TECHNOLOGY (Mechanical, Aeronautical and Manufacturing Engineering) 50%;
UKERC Cross Cutting Characterisation Not Cross-cutting 100%
Principal Investigator Prof T (Tim ) Mays
No email address given
Chemical Engineering
University of Bath
Award Type Standard
Funding Source EPSRC
Start Date 30 June 2014
End Date 28 February 2019
Duration 56 months
Total Grant Value £924,617
Industrial Sectors Energy
Region South West
Programme Energy : Energy
Investigators Principal Investigator Prof T (Tim ) Mays , Chemical Engineering, University of Bath (99.997%)
  Other Investigator Dr H Kim , Mechanical Engineering, University of Bath (0.001%)
Professor C Bowen , Mechanical Engineering, University of Bath (0.001%)
Dr A Burrows , Chemistry, University of Bath (0.001%)
  Industrial Collaborator Project Contact , EPL Composite Solutions (0.000%)
Web Site
Abstract This is a Case for Support for an inter-disciplinary research project at the University of Bath, UK to establish for the first time design and operation principles for hybrid nanoporous adsorption / high-pressure hydrogen gas storage tanks for use in sustainable energy applications, especially low-carbon vehicles. It is being submitted in response to the May 2013 EPSRC call for SUPERGEN Hydrogen Challenge projects, in particular to provide storage solutions using hybrid systems. If funded, the project will benefit from strong association with the EPSRC SUPERGEN Hydrogen and Fuel Cells Hub of which Mays (the Principal Investigator of this project) is a Co-Director.The proposed project, nominally to start in April 2014 ( 1,170 unindexed full economic cost), and involving seven researchers (127 work months in total), aims to determine how nanoporous adsorbents may be incorporated into Type IV (or equivalent) high-pressure gas tanks (operating at ~70 MPa and ~298 K) to enhance hydrogen capacity, optimise storage conditions and possibly confer additional benefits in terms of thermal and mechanical properties. The project incorporates three, linked workpackages. WP1 (led by Burrows, Co-Investigator, Chemistry) will generate novel nanoporous adsorbents to be used as tank liners, WP2 (led by Bowen. Materials Science and Kim, Mechanical Engineering, CIs) will study how these materials bond to, and affect the properties of, tank materials (in particular carbon-fibre reinforced resin composites) and WP3 (led by Mays, Chemical Engineering) will integrate WP1 and WP2 to develop an optimal design and operation strategy for hybrid tanks. The project partner, EPL Composites Ltd., Loughborough, UK, will provide expert advice on industrial and economic aspects of tank materials, manufacture and design (contribution worth 45k) and the University will provide strategic project support in the form a 36-month PhD studentship based in Chemical Engineering worth a total of 57k.
Publications (none)
Final Report (none)
Added to Database 30/10/14