UKERC Energy Data Centre: Projects

Projects: Projects for Investigator
UKERC Home >> UKERC Energy Data Centre >> Projects >> Choose Investigator >> All Projects involving >> EP/K021095/1
 
Reference Number EP/K021095/1
Title Flexible and Efficient Power Plant: Flex-E-Plant
Status Completed
Energy Categories ENERGY EFFICIENCY(Industry) 10%;
FOSSIL FUELS: OIL, GAS and COAL(Oil and Gas, Oil and gas combustion) 10%;
RENEWABLE ENERGY SOURCES(Bio-Energy, Applications for heat and electricity) 20%;
OTHER POWER and STORAGE TECHNOLOGIES(Electric power conversion) 60%;
Research Types Basic and strategic applied research 100%
Science and Technology Fields PHYSICAL SCIENCES AND MATHEMATICS (Metallurgy and Materials) 30%;
ENGINEERING AND TECHNOLOGY (Mechanical, Aeronautical and Manufacturing Engineering) 70%;
UKERC Cross Cutting Characterisation Not Cross-cutting 90%;
Sociological economical and environmental impact of energy (Environmental dimensions) 10%;
Principal Investigator Professor RC Thomson
No email address given
Inst of Polymer Tech and Materials Eng
Loughborough University
Award Type Standard
Funding Source EPSRC
Start Date 01 August 2013
End Date 28 February 2018
Duration 55 months
Total Grant Value £1,997,000
Industrial Sectors Energy
Region East Midlands
Programme Energy : Energy
 
Investigators Principal Investigator Professor RC Thomson , Inst of Polymer Tech and Materials Eng, Loughborough University (99.983%)
  Other Investigator Dr I Hardalupas , Department of Mechanical Engineering, Imperial College London (0.001%)
Professor AMKP Taylor , Department of Mechanical Engineering, Imperial College London (0.001%)
Professor P Cawley , Department of Mechanical Engineering, Imperial College London (0.001%)
Dr CM Davies , Department of Mechanical Engineering, Imperial College London (0.001%)
Dr JP Dear , Department of Mechanical Engineering, Imperial College London (0.001%)
Prof J (Jihong ) Wang , School of Engineering, University of Warwick (0.001%)
Professor JR Nicholls , School of Applied Sciences, Cranfield University (0.001%)
Mr JE (John ) Oakey , School of Applied Sciences, Cranfield University (0.001%)
Dr NJ (Nigel ) Simms , School of Applied Sciences, Cranfield University (0.001%)
Professor A Griffiths , Engineering, Cardiff University (0.001%)
Professor P Bowen , Engineering, Cardiff University (0.001%)
Dr R Marsh , Engineering, Cardiff University (0.001%)
Dr W Sun , Mechanical, Materials and Manufacturing Engineering, University of Nottingham (0.001%)
Professor DG McCartney , Mechanical, Materials and Manufacturing Engineering, University of Nottingham (0.001%)
Professor T Hyde , Mechanical, Materials and Manufacturing Engineering, University of Nottingham (0.001%)
Professor C (Colin ) Snape , Chemical and Environmental Engineering, University of Nottingham (0.001%)
Professor P Pilidis , School of Engineering, Cranfield University (0.001%)
  Industrial Collaborator Project Contact , EDF Energy (0.000%)
Project Contact , Babcock International Group plc (0.000%)
Project Contact , National Physical Laboratory (NPL) (0.000%)
Project Contact , Scottish and Southern Energy plc (0.000%)
Project Contact , Innovate UK (0.000%)
Project Contact , Emerson Process Management Ltd (0.000%)
Project Contact , E.ON New Build and Technology Ltd (0.000%)
Project Contact , Eggborough Power Ltd (0.000%)
Project Contact , R-MC Power Recovery Ltd (0.000%)
Project Contact , TWI Technology Centre (0.000%)
Project Contact , Siemens plc (0.000%)
Project Contact , Goodwin PLC (0.000%)
Project Contact , Alstom Ltd (UK) (0.000%)
Project Contact , RWE Generation (0.000%)
Project Contact , Rolls-Royce PLC (0.000%)
Web Site
Objectives
Abstract In order to meet UK Government targets to reduce CO2 emissions by 80% by 2050, rapid growth in electricity generation from intermittent renewable energy sources, in particular, wind, is required, together with increasing constraints on the operation and environmental performance of conventional coal and gas-fired plant. Unprecedented demands for operational plant flexibility (i.e. varing power output to reflect demand) will pose new challenges to component integrity in ageing conventional plant, which it is widely recognised will play a crucial role in maintaining security of supply. In parallel, demands on fuel flexibility to reduce emissions, i.e. firing gas turbine plant with low-carbon syngas or biogas and firing/cofiring steam plant with biomass, will create new challenges in plant engineering, monitoring and control, and materials performance. Improved plant efficiency is a key requirement to cut emissions and to make decarbonisation economically feasible. The continuous development of novel, stronger high temperature materials may also enable component replacement, rather than complete new build plant, to maintain the essential reserve of conventional generation capacity. Finally, the decarbonisation transition involves new and complex economic and environmental considerations, and it is therefore important that these issues of sustainability are addressed for the development of future conventional power plant.The research programme will consider the key issues of Plant Efficiency, Plant Flexibility, Fuel Flexibility and Sustainability and how these four intersecting themes impact upon plant operation and design, combustion processes in general and the structural integrity of conventional and advanced materials utilised in conventional power plants.Outcomes from the proposed Research Programme include:- Improved understanding of the complex relationship between plant efficiency, fuel flexibility, plant flexibility, component life and economic viability- Novel approaches for monitoring and control of future conventional power plants- Improved fuel combustion and monitoring processes to allow use of a wider range of fuels- Improved understanding of structural materials systems for use in components with higher operating temperatures and more aggressive environments- Improved coating systems to protect structural materials used in power plant components- New models for optimisation of operating conditions and strategies for future conventional power plantsThe consortium comprises six leading UK Universities with strengths and a proven track record in the area of conventional power generation - led by Loughborough University, working together with Cardiff and Cranfield Universities, Imperial College London and the Universities of Nottingham and Warwick. The Industrial Partners collaborating in this project include several major UK power generation operators, Original Equipment Manufacturers (OEMs), Government laboratories and Small and Medium Sized (SMEs) companies in the supply chain for the power generation sector. The Energy Generation and Supply Knowledge Transfer Network will be a formal delivery partner of the consortium.The proposal has been developed following extensive engagement with the industrial partners and as a result they have made very significant commitment, both financial and as integrated partners in the research programme
Publications (none)
Final Report (none)
Added to Database 23/09/13