go to top scroll for more

Review and application of Rainflow residue processing techniques for accurate fatigue damage estimation


Citation Marsh, G., Wignall, C., Thies, P.R., Barltrop, V., Incecik, A., Venugopal, V. amd Johanning, L. Review and application of Rainflow residue processing techniques for accurate fatigue damage estimation, International Journal of Fatigue, 82 (3): 757-765, 2017. https://dx.doi.org/10.1016/j.ijfatigue.2015.10.007.
Cite this using DataCite
Author(s) Marsh, G., Wignall, C., Thies, P.R., Barltrop, V., Incecik, A., Venugopal, V. amd Johanning, L.
Project partner(s) University of Edinburgh, E.ON Technologies Limited, University of Exeter
Publisher International Journal of Fatigue, 82 (3): 757-765
DOI https://dx.doi.org/10.1016/j.ijfatigue.2015.10.007
Abstract Most fatigue loaded structural components are subjected to variable amplitude loads which must be processed into a form that is compatible with design life calculations. Rainflow counting allows individual stress cycles to be identified where they form a closed stress strain hysteresis loop within a random signal, but inevitably leaves a residue of open data points which must be post-processed. Comparison is made between conventional methods of processing the residue data points, which may be non-conservative, and a more versatile method,which allows transition cycles to be processed accurately.; This paper presents an analytical proof of the method presented by Amzallag et al. The impact of residue processing on fatigue calculations is demonstrated through the application and comparison of the different techniques in two case studies using long term, high resolution data sets. The mostsignificance is found when the load process results in a slowly varying mean stress which is not fully accounted for by traditional Rainflow counting methods.

Highlights
  • The residue which remains from the Rainflow algorithm is identified and discussed.
  • Damaging transition cycles are missed by conventional Rainflow methods
  • Analytical proof is presented to allow extended periods to be processed accurately.
  • The significance of the new approach is demonstrated with case study examples.
This work was partly funded via IDCORE, the Industrial Doctorate Centre for Offshore Renewable Energy, which trains research engineers whose work in conjunction with sponsoring companies aims to accelerate the deployment of offshore wind, wave and tidal-current technologies
Associated Project(s) ETI-MA2003: Industrial Doctorate Centre for Offshore Renewable Energy (IDCORE)
Associated Dataset(s) No associated datasets
Associated Publication(s)

A model to map levelised cost of energy for wave energy projects

An Integrated Data Management Approach for Offshore Wind Turbine Failure Root Cause Analysis

An investigation of the effects of wind-induced inclination on floating wind turbine dynamics: heave plate excursion

Application of an offshore wind farm layout optimization methodology at Middelgrunden wind farm

Characterisation of current and turbulence in the FloWave Ocean Energy Research Facility

Characterization of the tidal resource in Rathlin Sound

Comparison of Offshore Wind Farm Layout Optimization Using a Genetic Algorithm and a Particle Swarm Optimizer

Component reliability test approaches for marine renewable energy

Constraints Implementation in the Application of Reinforcement Learning to the Reactive Control of a Point Absorber

Control of a Realistic Wave Energy Converter Model Using Least-Squares Policy Iteration

Cost Reduction to Encourage Commercialisation of Marine in the UK

Cumulative impact assessment of tidal stream energy extraction in the Irish Sea

Design diagrams for wavelength discrepancy in tank testing with inconsistently scaled intermediate water depth

Development of a Condition Monitoring System for an Articulated Wave Energy Converter

Dynamic mooring simulation with Code(-)Aster with application to a floating wind turbine

ETI Insights Report - Wave Energy

Environmental interactions of tidal lagoons: A comparison of industry perspectives

Exploring Marine Energy Potential in the UK Using a Whole Systems Modelling Approach

Hybrid, Multi-Megawatt HVDC Transformer Topology Comparison for Future Offshore Wind Farms

Hydrodynamic analysis of a ducted, open centre tidal stream turbine using blade element momentum theory

Offshore wind farm electrical cable layout optimization

Offshore wind installation vessels - A comparative assessment for UK offshore rounds 1 and 2

Optimisation of Offshore Wind Farms Using a Genetic Algorithm

Quantifying uncertainty in acoustic measurements of tidal flows using a “Virtual” Doppler Current Profiler

Re-creation of site-specific multi-directional waves with non-collinear current

Reactive control of a two-body point absorber using reinforcement learning

Reactive control of a wave energy converter using artificial neural networks

Reliability and O & M sensitivity analysis as a consequence of site specific characteristics for wave energy converters

Reliability prediction for offshore renewable energy: Data driven insights

Resource characterization of sites in the vicinity of an island near a landmass

Sensitivity analysis of offshore wind farm operation and maintenance cost and availability

Simulating Extreme Directional Wave Conditions

Testing Marine Renewable Energy Devices in an Advanced Multi-Directional Combined Wave-Current Environment

Testing the robustness of optimal access vessel fleet selection for operation and maintenance of offshore wind farms

The Industrial Doctorate Centre for Offshore Renewable Energy(IDCORE) - Case Studies

The SPAIR method: Isolating incident and reflected directional wave spectra in multidirectional wave basins

The effects of wind-induced inclination on the dynamics ofsemi-submersible floating wind turbines in the time domain

The power-capture of a nearshore, modular, flap-type wave energy converter in regular waves

UK offshore wind cost optimisation: top head mass (Presentation to All Energy, 10th May 2017)